Montag, 10. Dezember 2012

grunge or no grunge part II

I know I asked this before but wanted to double check. Grunge or no grunge? (ie: you will see dirt on my crystal clean couch)

Dienstag, 4. Dezember 2012

1/8" 3D PRINT

1/8" 3D print of top corner facade (1BR apartment suite units) that covers two floors.

Montag, 3. Dezember 2012

New Facade

Matias, here is my new facade could you please tell me what you think? if i should keep rendering this one or should i still work on it.


Spa Render

Donnerstag, 29. November 2012

Apartment Suite Unit - interior test render

With grunge or without grunge filter?

test for big render - Katie

test angle for big render with panels and glazing

Test for large Render - JDO

This is the final site model 1"=200"

This is a quick version of be the big rendering for the boards. The ground level has been updated and the pool has been worked on too. Any major changes need to be made to the model in this scene?  If not, I will move toward the maxwell version of the rendering as well as begin producing the exploded axon...

Dienstag, 27. November 2012

Maxwell Material Tips

Here is a link that has some maxwell tips for materials, especially glass.

Maxwell Material Tests

I tried out different perforated materials. Some work better than others. None of them apply the perforations across the entire material. All of the materials were applied uniformly to all the irregular particles. So I imagine that the perforations should have applied to the entire particle, which didn't happen. Thoughts on how to fix this? I also haven't been able to find out to scale the material. But I did change the material of the floor slabs! -Sarah

Sonntag, 25. November 2012

Initial Renders

These have not been processed at all. I'm not sure how to to fix the sparkling that I get in some renders. Any thoughts on how to fix this? I'm trying another render using a different kind of glass, perhaps that will help?

Samstag, 24. November 2012


I remodeled most of the components of the building. I will be using 2-ply bristol board for this massing model. 2-ply comes out to be 0.03" so hopefully this stacking method will be useful for the bigger model. I also plan to use spackle or putty to round out the edges to create the smooth curvatures of the building. Here are also other images of my edited building. hope you guys had a wonderful holiday!

Donnerstag, 22. November 2012

Model Facade Study - JDO

4th iteration of facade studies for the 1-200 Scale Model.
Laser Cutting, Etch & Score on Clear & Bone-White Acrylic.

Dienstag, 20. November 2012

Night rendering attempt

First attempt at a night render (1 minute in) of approach from the west. Any recommendions for "dusk" night rendering settings? (ie: time of day environment setting, ISO, shutter, tricks, light placements, materials, etc).